1153 THERMOSTAT AND ENGINE-MOUNTED COOLANT LINES (750i 2016-2019)
1153 TIGHTENING TORQUE OVERVIEW
| Banjo bolt for coolant line on exhaust turbocharger | ||
| M14x1.5 Replace sealing rings. |
tightening torque | 35 Nm |
| Banjo bolt for coolant line on exhaust turbocharger | ||
| Banjo bolt M14x1.5 Replace screw. Replace sealing rings. |
tightening torque | 35 Nm |
| Coolant line to cylinder head | ||
| M6 | tightening torque | 8 Nm |
| Coolant line to exhaust turbocharger | ||
| M6x16 | tightening torque | 10 Nm |
| Coolant thermostat to coolant pump | ||
| M6 | tightening torque | 10 Nm |
| Distributor block to holder | ||
| M6x30 screw | Tightening torque | 8 Nm |
| Heater return | ||
| M6x18 | Tightening torque | 8 Nm |