1141 OIL PUMPS WITH STRAINER AND DRIVE (M760i xDrive 2017-2022)
1141 TIGHTENING TORQUE OVERVIEW
| Control line to crankcase | ||
| M10 | Tightening torque | 23 Nm |
| Control line to oil pump | ||
| M6x16 | Tightening torque | 10 Nm |
| Coolant pipe on coolant chamber end cover | ||
| M6x25 | Tightening torque | 10 Nm |
| Hydraulic valve to oil sump | ||
| M6x18/M6x20 | tightening torque | 10 Nm |
| Oil intake manifold to oil pump | ||
| M6 | Tightening torque | 10 Nm |
| Oil pump drive gear to hub | ||
| M6 | Tightening torque | 10 Nm |
| Oil pumps flange to oil pump | ||
| M10 | Joining torque | 20 Nm |
| Angle of rotation | 40° | |
| Oil pump to bearing journal | ||
| Nut M8 | Tightening torque | 24 Nm |
| Oil pump to bearing journal adjustment screw | ||
| M8x45 | Tightening torque | 24 Nm |
| Special tool 0495262 | ||
| Screw plug to cap nut | Tightening torque | 15 Nm |