Installing starter motor
- Insert and install the starter motor (2) .
- Tighten down screws (1) .
TIGHTENING TORQUE SPECIFICATIONS
| Starter motor to crankcase | ||
|---|---|---|
| M8x60 | Tightening torque | 19 Nm |
Follow-up work
- Refer to INSTALLING THE ACOUSTIC COVER FOR THE OIL SUMP .
- Refer to INSTALL THE STIFFENING PLATE .
- Refer to INSTALL FRONT STIFFENING PLATE .
- Refer to INSTALLING THE UNDERBODY PROTECTION OF THE STEERING GEAR OR THE FRONT THRUST FIELD .
- Refer to CONNECTING ALL BATTERY GROUND LEADS .