Install the rear illuminated sill trim

• If necessary, unclip the remaining clips (2) in the body using a suitable tool.
• Feed the cable under the edge protection.
• Clip in the sill trim (1) with the clips (2).
• Mount the edge protection in the area of the rear sill trim (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect the connector (1) in the area of the lower B-pillar.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE LOWER B-PILLAR TRIM PANEL .
• Refer to INSTALLING THE UPPER B-PILLAR TRIM PANEL .
• Refer to INSTALLING THE REAR DOOR SILL COVER STRIP .
• Refer to INSTALLING THE FRONT DOOR SILL COVER STRIP .