Tighten the bolts on the front axle support

• Replace screws (1)  to (3)  .

  Parts:  Screws

• Tighten down screws (3)  .

TIGHTENING TORQUE SPECIFICATIONS

Front axle carrier to body, front
M12 Replace screws.	Joining torque	108 Nm
	Angle of rotation	45°

Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screws (2)  .

TIGHTENING TORQUE SPECIFICATIONS

Front axle support to center of body
M12 Replace screws.	Joining torque	108 Nm
	Angle of rotation	45°

• Tighten down screws (1)  .

TIGHTENING TORQUE SPECIFICATIONS

Front axle carrier to body, rear
M14 Replace screws.	Joining torque	108 Nm
	Angle of rotation	45°

NOTE: Perform the steps on the right and left side.

• Replace screws (1)  .

  Parts:  Screws

• Tighten down screws (1)  .

TIGHTENING TORQUE SPECIFICATIONS

Bottom bumper bracket on the front subframe.
M8x100 Replace screws.	Tightening torque	19 Nm

Courtesy of BMW OF NORTH AMERICA, INC.