Install the retaining plates
- Install holder (2) .
- Replace screws (1)
.
Parts: Screws
- Tighten down screws (1)
.TIGHTENING TORQUES SPECIFICATION
Retaining plates for vehicle underbody cover Sheet metal nut/plastic nut
Replace nuts.tightening torque 3 Nm - Install holder (4) .
- Replace screws (3)
.
Parts: Screws
- Tighten down screws (3) .
TIGHTENING TORQUES SPECIFICATION
| Retaining plates for vehicle underbody cover | ||
| Sheet metal nut/plastic nut Replace nuts. |
tightening torque | 3 Nm |