LEMON Manuals
: Even more car manuals for everyone
Home
>>
BMW
>>
2021
>>
740i
>>
Repair and Diagnosis
>>
General Information
>>
OEM General Information
>>
General Orphan Data (1 Of 4)
>>
Fastening the banjo bolt for the coolant feed line on the exhaust turbocharger of cylinders 5 through 8
Fastening the banjo bolt for the coolant feed line on the exhaust turbocharger of cylinders 5 through 8
Replace sealing rings.
Parts
: Sealing ring
Position the coolant feed line.
Tighten the banjo bolt (1).
TIGHTENING TORQUE SPECIFICATIONS
Banjo bolt for coolant line on exhaust turbocharger
M 14x1.5 Replace sealing rings.
tightening torque
35 Nm
Courtesy of BMW OF NORTH AMERICA, INC.
Courtesy of BMW OF NORTH AMERICA, INC.