Remove charge air line
WARNING:
High voltage.
Mortal hazard through electric shock!
Mortal hazard through electric shock!
- Before removal, disconnect all components from the voltage supply: Switch off lighting system and ignition.
- For additional information see:
SAFETY INSTRUCTIONS FOR HANDLING BULBS/LIGHT SOURCES (EXTERIOR LIGHTING) .
Preliminary work
- Refer to REMOVING THE ACOUSTIC COVER .
- Refer to REMOVING RESONATOR .
- Refer to REMOVING CLEAN AIR PIPE .
WARNING:
Hot surfaces.
Risk of burning!
Risk of burning!
- Perform all work only on components that have cooled down.
- Unlock plug connection (1) and disconnect.
- Unlock and loosen clamp (2).
- Unlock plug connection (3) and disconnect.
- Remove screws (arrows).
- Unlock and loosen the clamp (4) on the turbocharger.
- Guide out and remove charge air line (5).