1112 CYLINDER HEAD WITH LID (750i xDrive 2016-2022)

1112 TIGHTENING TORQUE OVERVIEW

Cylinder head bolt
M11 Replace screws.		Joining torque	30 Nm
		1. Angle of rotation	90°
		2. Angle of rotation	140°
Cylinder head bolt to timing case cover
M8x30		tightening torque	23 Nm
Cylinder head cover to cylinder head
M6x30 screw		Tightening torque	10 Nm
Cylinder head to special tool
screw		Tightening torque	25 Nm
Engine suspension element
M8x22 screw		Tightening torque	20 Nm
Flange to assembly jig
M14X30		Tightening torque	135 Nm
Fuel line
M6x16		Tightening torque	10 Nm
Intake/exhaust camshaft
M6 Snug torque			10 Nm
		Tightening torque	10.5 Nm
Oil filler neck
M6x16		tightening torque	10 Nm
Sealing cap on cylinder head cover
M6x25 screw		tightening torque	10 Nm
Special tool to cylinder head 1 to 4
M6x15		tightening torque	10 Nm
Special tool to cylinder head bank 2
M8 screw		tightening torque	25 Nm
Stud bolt on cylinder head
M8x50	Replace the stud bolt.	tightening torque	20 Nm
Timing case cover on cylinder head
M6x20 screw		Tightening torque	9.5 Nm
Valve in cylinder head
valve		Tightening torque	0.8 Nm
Venting connector/special tool to cylinder head
M8x1 Replace the venting connector.		Tightening torque	15 Nm