Securing the central bolt of the variable camshaft timing control of the intake
WARNING: This page does not describe the selected car, but rather 30 other vehicles, including the 2022 BMW M760i xDrive, 2022 BMW 750i xDrive, 2022 BMW 745e xDrive, 2022 BMW 740i, and 2021 BMW M760i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
- Tighten central bolt (1) on the intake adjuster with an electronic torque/torsion angle wrench (2) .
TIGHTENING TORQUE SPECIFICATIONS
| Variable camshaft timing control central bolt to camshaft | ||
|---|---|---|
| M10x1 Replace screws and grease contact surface with copper paste. |
1. Joining torque | 30 Nm |
| 2. Angle of rotation | 90° | |