Installing the holder for the DME control unit on the left

• Install the holder (1)  for the DME control unit on the left.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screw (1)  .

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Check the coolant level in the low-temperature coolant circuit and top up, if needed. Refer to FILLING THE LOW-TEMPERATURE COOLING SYSTEM WITH THE VACUUM FILLING EQUIPMENT .
• Refer to INSTALLING COVER FOR THE LEFT DME CONTROL UNIT .
• Refer to INSTALLING THE DME CONTROL UNIT FOR CYLINDERS 5 TO 8 .