Installing the front carpet
- Lay removed carpet on the new carpet (1) and transfer cuts to new carpet (1) .
- Cut off the highlighted area (2)
on the new carpet (1)
.
- Insert the carpet (1) in the car.
- Make sure the carpet (1) is positioned correctly at all adjacent parts and in area of heating and air-conditioning unit (2) .
Follow-up work
- Refer to INSTALLING THE CENTER CONSOLE .
- Refer to INSTALLING THE CENTER STACK TRIM .
- Refer to INSTALLING THE FOOTWELL TRIM PANEL ON THE RIGHT .
- Refer to INSTALLING THE TRIM PANEL FOR THE PEDAL ASSEMBLY .
- Refer to INSTALLING THE FRONT STORAGE COMPARTMENT .
- Refer to INSTALLING THE CENTER ARMREST STORAGE COMPARTMENT .
- Refer to INSTALLING THE REAR STORAGE COMPARTMENT/DVD PLAYER .
- Refer to INSTALLING THE REAR CENTER CONSOLE TRIM .
- Refer to INSTALLING BOTH BOTTOM B-PILLAR TRIMS .
- Refer to PARTIALLY INSTALLING THE B-PILLAR TRIM PANELS AT THE TOP LEFT AND RIGHT .
- Refer to INSTALLING BOTH REAR DOOR SILL COVER STRIPS .
- Refer to INSTALLING THE SIDE TRIM PANEL IN THE FOOTWELL AT THE LEFT A-PILLAR .
- Refer to INSTALLING ACCELERATOR PEDAL MODULE .
- Refer to INSTALLING SIDE TRIM PANEL IN FOOTWELL ON RIGHT A-PILLAR .
- Refer to INSTALLING BOTH FRONT DOOR SILL COVER STRIPS .
- Refer to installing both speaker trims on the central bass.NOTE: Description is for right component only. The procedure on the left side is identical.
- Position the speaker trim (2) correctly.
- Tighten the screws (1).
- Insert the air duct (2) into the carpet (3).
- Install expanding rivet (1).
- Correctly position the speaker trim (1) and clip it into the carpet (2).
- In equipment specifications with rail:
Correctly position the rail (2) and tighten the screws (1).
- Refer to INSTALLING BOTH FRONT SEATS .
- Refer to ACTIVATING THE 48 V ELECTRICAL SYSTEM .