Installing the front door sill cover strip

• Install the door sill cover strip (3).
• Ensure correct fit of the door sill cover strip (3) on all adjacent components.
• Mount the expanding rivets (2).
• Tighten down screw (1).

TIGHTENING TORQUE SPECIFICATIONS

Door sill cover strip
	Tightening torque	2 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

• Install sill trim (1).
• Ensure correct fit of the sill trim (1) on the edge protection and on the door sill cover strip.

Courtesy of BMW OF NORTH AMERICA, INC.