Installing the flat motor for the rear power windows

• Correctly position the flat motor (4)  .
• Tighten down screws (3)  .
• Connect connectors (2)  and lock.
• Fold the fleece (1)  downwards.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Correctly position the holder (2)  .
• Tighten the screws (1)  .

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE MODULE BRACKET ON THE REAR DOOR .
• Refer to INSTALLING THE MID-RANGE SPEAKER IN THE REAR DOOR .
• Refer to INSTALLING REAR DOOR TRIM PANEL .
• Refer to INSTALLING THE DECORATIVE STRIP ON THE REAR DOOR TRIM PANEL  .
• Refer to PARTIALLY INSTALLING THE FRAME TRIM ON THE WINDOW FRAME OF THE REAR DOOR .