51 47 Floor-Trunk-Engine Compartment-Trim Panel
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2019 BMW 340i GT xDrive, 2019 BMW 330i xDrive, 2019 BMW 330i GT xDrive, 2018 BMW 340i GT xDrive, and 2018 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
51 47 FLOOR-LUGGAGE COMPARTMENT-ENGINE COMPARTMENT TRIM PANEL - TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Lashing eye to body | F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36/F45/F46/F48/F49/F80/F82/F83/F87 | 19 Nm | ||
| 2AZ Fitting, load area net to body (roof) | F20/F21 | 6 Nm | ||
| F31 | M6 | 7.6 Nm | ||
| M8 | 15 Nm | |||
| 3AZ Holder, roller cover for luggage compartment/load area net to body (luggage compartment) | F31 | M8 | 15 Nm | |
| 4AZ Cover, mounting load area net | F31 | 2.6 Nm | ||
| 5AZ Lashing rail to side member | F34 | 19 Nm | ||
| 6AZ Pin (from luggage compartment wheel arch trim panel) to side member | F48/F49 | 1 Nm | ||
| 7AZ Luggage compartment well to side of insert | F48/F49 | 1 Nm | ||
51 47 TIGHTENING TORQUE OVERVIEW
| Shelf on body | |
| Plastic nut | 3 Nm |
| Storage compartment to body | |
| 3.5 Nm | |
| Underbody protection/underbody planking/heat insulation | |
| Screw not metric thread | 3 Nm |
| Screw M6 | 8.8 Nm |
| Nut | 2.5 Nm |
| Underbody protection front | |
| Screw not metric thread | 3 Nm |
| Screw M6 | 8.8 Nm |
| Nut | 2.5 Nm |