Installing the tension strut (on the rear axle) on the left or right
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2019 BMW 340i GT xDrive, 2019 BMW 330i xDrive, 2019 BMW 330i GT xDrive, 2018 BMW 340i GT xDrive, and 2018 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
TECHNICAL INFORMATION
Driving without the strut brace/front-end strut or tension strut is not permitted.
Driving without the strut brace/front-end strut or tension strut is not permitted.
NOTE:
The description is for one component only. The procedure is identical for all further components.
- Position tension strut (3).
- Replace screws.
Parts: Bolts
- Tighten down screws (2).
TIGHTENING TORQUE SPECIFICATIONS
| Rear trailing link | |
|---|---|
| M12x35 Replace screw. |
|
| 100 Nm 90° |
|
- Replace screw.
Parts: Screw
- Tighten down screw (1).
TIGHTENING TORQUE SPECIFICATIONS
| Rear trailing link | |
|---|---|
| M10x20 Replace screw. |
|
| 56 Nm | |