Removing and installing/replacing rear left or right wheel arch cover (330i xDrive Wagon, 328d xDrive Wagon, 330i GT xDrive, 340i GT xDrive)
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2019 BMW 340i GT xDrive, 2019 BMW 330i xDrive, 2019 BMW 330i GT xDrive, 2018 BMW 340i GT xDrive, and 2018 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove rear WHEEL .
NOTE:
The number of mounting elements may vary, depending on the vehicle type and equipment fitted.
Release screws/expanding rivets (1).
Release all nuts (2).
Tightening torque 51 75 2AZ .
Remove wheel arch cover (3).
Installation note:
Make sure wheel arch cover (3) is correctly seated.