Removing and installing/replacing rear underbody protection (330i xDrive Wagon, 328d xDrive Wagon, 330i GT xDrive, 340i GT xDrive)

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2019 BMW 340i GT xDrive, 2019 BMW 330i xDrive, 2019 BMW 330i GT xDrive, 2018 BMW 340i GT xDrive, and 2018 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Illustration only an example. There may be differences in detail in the case of other models.

Release screws along line (1) and remove underbody protection (2).

Tightening torque 51 75 1AZ .

Courtesy of BMW OF NORTH AMERICA, INC.