Removing and installing/replacing finishing strip on rear left or right entrance (outer) (330i xDrive Wagon, 328d xDrive Wagon, 330i GT xDrive, 340i GT xDrive)

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2019 BMW 340i GT xDrive, 2019 BMW 330i xDrive, 2019 BMW 330i GT xDrive, 2018 BMW 340i GT xDrive, and 2018 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 93 17

Lift cover panel (2) up and out at clips (1) using special tool 00 9 317.

Remove cover (2).

NOTE: Depending on the model, cover panel (2) is secured with a different number of clips (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

If necessary, remove clips (1) from entrance with a suitable tool.

Replace faulty clamps (1).

Courtesy of BMW OF NORTH AMERICA, INC.