51 45... Removing and installing/replacing side panel on dashboard on left or right (330i xDrive Wagon, 328d xDrive Wagon, 330i GT xDrive, 340i GT xDrive)
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2019 BMW 340i GT xDrive, 2019 BMW 330i xDrive, 2019 BMW 330i GT xDrive, 2018 BMW 340i GT xDrive, and 2018 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
- 00 9 327
When working on trim panel components, make sure that visible surfaces are not scratched or damaged (e.g. by sharp-edged tools).
Pull off seal (1) in the area of the side panel (2).
Unclip side panel from dashboard (2) in direction of arrow with special tool 00 9 327 and feed out at a slant to the rear.
If necessary, unlock plug connection on switch for front passenger airbag deactivation and unplug.
Installation note:
Latch mechanisms (1) and guide tab (2) on side panel (3) must not be damaged or missing.
Replacement with switch for front passenger airbag deactivation:
Saw out inside mark (1) with 25 mm dia. jigsaw.
Mill off remnants up to mark (1).
Replacement:
Remount front passenger airbag deactivation SWITCH .