Removing and installing/replacing rubber window seal for front left or right side window (330i GT xDrive, 340i GT xDrive)
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2019 BMW 340i GT xDrive, 2019 BMW 330i xDrive, 2019 BMW 330i GT xDrive, 2018 BMW 340i GT xDrive, and 2018 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove front door REAR-VIEW MIRROR
- Remove front door outside WEATHER STRIP
- Remove front door inside WEATHER STRIP
IMPORTANT:
The "NOTES
on fitting window guide seals" serve as the basis for this repair instruction and must be observed without fail.
Release rubber window seal (1) at lugs (2).
Pull out rubber window seal (1) from window guide rail.
Installation note:
Moisten rubber guide (1) prior to fitting with APPROVED LUBRICANT .
Insert rubber window seal (1) at front/bottom correctly into window guide rail.
Installation note:
Rubber guide (1) must not be damaged in corners (2).