Removing and installing/replacing rear window (330i xDrive Wagon, 328d xDrive Wagon)

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2019 BMW 340i GT xDrive, 2019 BMW 330i xDrive, 2019 BMW 330i GT xDrive, 2018 BMW 340i GT xDrive, and 2018 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove AERIAL AMPLIFIER .

Disconnect plug connection (1).

Lever out clip (2).

Release nut (3) and remove holder for wiring harness.

Feed out wiring harness (4) from rear window.

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Rear window hinge is under preload!
To release rear window lock nuts, open completely!

NOTE: Rear window shown closed here for purposes of clarity.

Unscrew nuts (1).

Tightening torque 51 31 1AZ .

Carefully remove rear window (2) with another person and place it on a soft surface.

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Modify REAR-WINDOW BUTTON .

IMPORTANT: If the rear window is broken:

Remove all glass splinters, also from underneath seats.
Check seat belts:
- Condition of seat belt strap
- Function of automatic reel
- Seat belt locking reel
- Check seat belt buckle
If the vehicle is equipped with a roller cover for luggage compartment, check the housing box for glass splinters and ensure that the automatic reel is functioning properly.

Concluding tasks:

Check and, if necessary, correct rear WINDOW SETTING .