Removing and installing/replacing switch for automatic tailgate activation (330i xDrive Wagon, 328d xDrive Wagon, 330i GT xDrive, 340i GT xDrive)

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2019 BMW 340i GT xDrive, 2019 BMW 330i xDrive, 2019 BMW 330i GT xDrive, 2018 BMW 340i GT xDrive, and 2018 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 327

Removal:

Courtesy of BMW OF NORTH AMERICA, INC.

Lever switch for automatic operation of tailgate (1) out of tailgate trim panel (2) with special tool 00 9 327.

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock connector (1) on switch for automatic operation of tailgate (2) and disconnect.

Installation:

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Retaining clips on switch for automatic operation of tailgate (2) must not be missing or damaged.

Connect connector (1) to switch for automatic operation of tailgate (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Insert switch for automatic operation of tailgate (1) into tailgate trim panel (2).