Installing starter motor
- Insert and install the starter motor (2).
- Tighten down screws (1).
TIGHTENING TORQUES SPECIFICATION
| Starter motor to engine | ||
| M8X60 | tightening torque | 19 Nm |
TIGHTENING TORQUES SPECIFICATION
| Starter motor to crankcase | ||
| M8x60 | Tightening torque | 19 Nm |
Follow-up work
- Refer to INSTALLING THE ACOUSTIC COVER FOR THE OIL SUMP .
- Refer to INSTALLING THE THRUST FIELD .
- Refer to CONNECTING NEGATIVE BATTERY CABLE .
- Refer to ACTIVATING THE 48 V ELECTRICAL SYSTEM .
- Refer to ONLY DURING STARTER MOTOR REPLACEMENT FOR VEHICLES WITH AUTOMATIC ENGINE START-STOP FUNCTION (MSA) .