Removing and installing/replacing the SDARS (SDARS), (US version from 09/2009 only) (330i xDrive Wagon, 328d xDrive Wagon, 330i GT xDrive, 340i GT xDrive)
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2019 BMW 340i GT xDrive, 2019 BMW 330i xDrive, 2019 BMW 330i GT xDrive, 2018 BMW 340i GT xDrive, and 2018 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Preliminary work needed:
- Remove CAR INFORMATION COMPUTER (CIC) .
For equipment specification with head unit:
- Remove either HEADUNIT BASIS or HEADUNIT (HU-H) .
When replacing, please observe:
Note SID number (1) of the removed device.
NOTE:
The SID number (1) can be found on the label of the housing. Location may be different, depending on the equipment manufacturer.
Note SID number (1) of the new device in the same way.
Input the enabling code from the applicable BMW Aftersales Assistance information.
Replacement:
Carry out PROGRAMING/CODING .
NOTE:
Please contact Sirius. Use the SID number to cancel current device and register new one.