Removing and installing/replacing underbody protection (front) (330i xDrive Wagon, 328d xDrive Wagon, 330i GT xDrive, 340i GT xDrive)

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2019 BMW 340i GT xDrive, 2019 BMW 330i xDrive, 2019 BMW 330i GT xDrive, 2018 BMW 340i GT xDrive, and 2018 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Illustration only an example. Detail deviations (depending on engine version) are possible.

Release screws (1).

Tightening torque 51 75 1AZ .

Release all screws along line (2).

Tightening torque 51 75 1AZ .

Remove underbody protection (3).

Courtesy of BMW OF NORTH AMERICA, INC.