Remove front entrance cover strip

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2019 BMW 340i GT xDrive, 2019 BMW 330i xDrive, 2019 BMW 330i GT xDrive, 2018 BMW 340i GT xDrive, and 2018 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Description is for left component only. Procedure on the right side is identical.

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: RISK OF DAMAGE
Bending of plastic components .
Application of too much force can lead to bending of plastic components .

Place special tool directly beside the mounting clip.
Continue unclipping the part without using the tool if possible.

Unclip the front door sill cover strip (1) at the clips (2) using the special tool 0 496 569 (00 9 325) in the direction of arrow starting from the rear.

Courtesy of BMW OF NORTH AMERICA, INC.

If applicable, unclip the clips (1) from the floor panel (2).