Removing and installing or replacing trim for roof pillar at front (A-pillar), left or right (330i xDrive Wagon, 328d xDrive Wagon)
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2019 BMW 340i GT xDrive, 2019 BMW 330i xDrive, 2019 BMW 330i GT xDrive, 2018 BMW 340i GT xDrive, and 2018 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
SAFETY INSTRUCTIONS
for working on vehicles with airbag systems.
IMPORTANT:
Do not use any sharp-edged tools to remove trim (risk of damage to head airbag).
Detach edge protection (1) in area of trim panel (2).
Release trim panel (2) inwards from first detent position of clamp (3).
Pull trim panel (2) upwards and feed out from clamp (3) and clip (4).
Installation note:
Make sure EDGE PROTECTION (1) is correctly seated.
Always replace clamp (3).
Installation note:
Always replace clamp (1).
Lever out clip (2) remaining in body and insert in trim panel.
Replace faulty clip (2).
Make sure guides (3) is correctly seated in associated mounts.