Install the A-pillar trim panel
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2019 BMW 340i GT xDrive, 2019 BMW 330i xDrive, 2019 BMW 330i GT xDrive, 2018 BMW 340i GT xDrive, and 2018 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
RISK OF DAMAGE
Careless handling of tools and sharp-edged components .
Scratches, surface damage .
Careless handling of tools and sharp-edged components .
Scratches, surface damage .
- Protect working area.
- Handle tools and components carefully.
NOTE:
TECHNICAL INFORMATION
Note safety instructions for working on vehicles with airbag systems.
For additional information see: 51 00 SAFETY INSTRUCTIONS for working on vehicles with airbag systems
Note safety instructions for working on vehicles with airbag systems.
For additional information see: 51 00 SAFETY INSTRUCTIONS for working on vehicles with airbag systems
- Replace faulty clips (1).
- Remove any remaining clips (1) from the bore hole and mount to the A-pillar trim panel (2).
- Insert the guide (3) of the A-pillar trim panel (2) in the instrument panel trim.
- Set the A-pillar trim panel (2) onto the relevant bore holes of the clips (1).
- Clip in the A-pillar trim panel (2) in the direction of the arrow.