Removing and installing/replacing complete rear left or right power window regulator (330i xDrive Wagon, 328d xDrive Wagon)
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2019 BMW 340i GT xDrive, 2019 BMW 330i xDrive, 2019 BMW 330i GT xDrive, 2018 BMW 340i GT xDrive, and 2018 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary work:
- Release rear DOOR WINDOW .
NOTE:
Disengage, but do not remove, the door window and secure in the door window frame.
Unlock plug connection (1) and disconnect.
Release nuts (2) and feed out power window regulator (3).
Tightening torque 51 35 2AZ .
Replacement
Swap over FLAT MOTOR for power window regulator.