Removing and installing/replacing door post cover (outside B-pillar) (330i GT xDrive, 340i GT xDrive)
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2019 BMW 340i GT xDrive, 2019 BMW 330i xDrive, 2019 BMW 330i GT xDrive, 2018 BMW 340i GT xDrive, and 2018 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Release sealing (1) in area (2).
Raise sealing (1) in area (3).
Release screws (4).
Tightening torque 51 33 4ZD.
Feed cover (1) on door post out of holder (2) in direction of arrow.
Feed sealing (1) out of cover (2) along the marks.
Installation note:
Danger of water ingress and wind noise!
Sealing (1) must be correctly mounted in cover (2).