Replacing base plate for number/license plate (330i xDrive Wagon, 328d xDrive Wagon)
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2019 BMW 340i GT xDrive, 2019 BMW 330i xDrive, 2019 BMW 330i GT xDrive, 2018 BMW 340i GT xDrive, and 2018 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Only use the vehicle-specific number plate baseplate.
The installation of other license plate baseplates is not permissible.
The number plate must be mounted exactly on the number plate baseplate.
If a number plate baseplate is not offered for the corresponding national-market version, the number plate must be mounted directly on the bumper using a drilling template.
Incorrect assembly leads to a malfunction of the sensors of the driver assist systems.
NOTE:
Schematic diagram is example of F30 Europe national-market version.
Release screws (1).
Tightening torque 51 11 8AZ .
Remove holder (2) towards front.
If replacing bumper:
Drill out marks (1) on bumper to 10 mm.
Attach support (2) to bumper and insert screws (1).
Tightening torque 51 11 8AZ .