Removing and installing (replacing) ornamental grille for bumper panel (side) (330i xDrive Wagon, 328d xDrive Wagon)

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2019 BMW 340i GT xDrive, 2019 BMW 330i xDrive, 2019 BMW 330i GT xDrive, 2018 BMW 340i GT xDrive, and 2018 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Because the ornamental grille is secured from the back in the Luxury Line model, the bumper panel must be removed first.

Luxury Line model:

Release circlip (1).

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Ornamental grille (1) is secured along the line (2) with latch mechanisms (3) on the bumper panel.

Pull ornamental grille (1) out towards front.

Installation note:

Catches (2) must not be damaged or missing.

Courtesy of BMW OF NORTH AMERICA, INC.

In the case of replacement with appropriate version:

NOTE: Diagram as an example based on the "Sport series" design

Release cover rod (1) at latch mechanisms (2).

Remove finisher rod (1).

Installation note:

Catches (2) must not be damaged or missing.

Courtesy of BMW OF NORTH AMERICA, INC.