Installing the tailgate lock
- Tighten the screws (2).
TIGHTENING TORQUES SPECIFICATION
| Tailgate lock to body | ||
| Hexagon screw M8x20 |
Tightening torque | 19 Nm |
- Connect connector (1).
- Version with Soft Close Automatic:
Attach the Bowden cable (3).
Connect connector (4).
- Version with emergency release:
Attach the Bowden cable (5).
Follow-up Work
- Install loading EDGE TRIM .
- Install the luggage compartment floor TRIM PANEL .
- Adjust rear LID LOCK .