27 10 Transfer Case
2710 TIGHTENING TORQUE OVERVIEW
| Brush module lid to housing | ||
| M6 Replace screw. |
Tightening torque | 8 Nm |
| Angle of rotation | 60° | |
| Ground strap | ||
| M8 | Tightening torque | 19 Nm |
| Oil drain plug to & from oil module | ||
| Tightening torque | 5 Nm | |
| Oil drain plug to transmission | ||
| M16 | Tightening torque | 35 Nm |
| Oil filler and oil drain plugs | ||
| M22 Replace screw. |
Tightening torque | 60 Nm |
| Transfer box to automatic transmission | ||
| Tightening torque | 43 Nm | |
| Undercoating to electric drive unit | ||
| Tightening torque | 8 Nm | |
| VTG control unit on transfer box | ||
| M8 | Tightening torque | 25 Nm |