Remove the upper seat belt (REMA)
WARNING:
Pyrotechnic components.
Danger! Immobilization period-threatening injuries!
Danger! Immobilization period-threatening injuries!
- All work on pyrotechnic parts may be carried out by technically experienced and appropriately trained personnel only.
- Replace any damaged part or ones that have been dropped.
- For additional information see: 72 00 SAFETY REGULATIONS ON HANDLING COMPONENTS WITH GAS GENERATORS .
WARNING:
Airbag unit.
Danger! Immobilization period-threatening injuries!
Danger! Immobilization period-threatening injuries!
- Before performing any work on the airbag, always disconnect the battery ground lead from the battery.
- Airbag unit may only be set down with the cushion (airbag itself) facing upwards.
- For additional information see: 72 00 SAFETY REGULATIONS ON HANDLING COMPONENTS WITH GAS GENERATORS
NOTE:
Schematic diagram is for example purposes. Some parts may differ in certain details.
- Loosen screws (1) .
- Remove the slide bar (2) .
- Loosen screw (3)
.NOTE: TECHNICAL INFORMATION
SA5AL Active Protection:
REMA = Reversible electromotive reel. - Unlock plug connections (1) and disconnect.
- Remove the wiring harness with the holder (2) .
- Release screws (3) and (4) .
- Remove the seat belt retractor (5) .