Slackening the wishbone on the front subframe
NOTE:
The following step(s) must be performed if the listed component(s) is/are installed.
- Unlock the holder (1) of attachment rod (2) for the ride height sensor and release from the wishbone (3).
 Courtesy of BMW OF NORTH AMERICA, INC.
|
- Slacken the screw (1) using the standard tool (2). In doing so, counter support at the nut (3).
Standard tool: Pivoting extension
1/2 inch
Swivel extension 1/2 inch
 Courtesy of BMW OF NORTH AMERICA, INC.
|
 Courtesy of BMW OF NORTH AMERICA, INC.
|
Swivel extension 1/2 inch