Removing the seat surface cover for the rear seat

• Unclip the ISOFIX glares (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Detach the seat surface cover of the foam cushion at the holders (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Release the clamps (1) on the left and right.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Release all clamps along the trim wires.
• Completely remove the clamps from the seat surface cover and the foam cushion.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Guide out and remove the seat surface cover (1) in the area (2).

Courtesy of BMW OF NORTH AMERICA, INC.