Partially installing the rear headlining (lowered)

Check the clips (2) on the headlining (1) for damage and replace if necessary.
Correctly position the headlining (1) and feed it into the respective edge protection.
Clip in headlining (1) with the clips (2).

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Perform the steps on the left and right side.

NOTE: To provide a better overview: Schematic diagram with partially hidden components.

NOTE: Schematic diagram is for example purposes. Some parts may differ in certain details.

Courtesy of BMW OF NORTH AMERICA, INC.
Fasten the expanding rivet (1) on the headlining (2).