Fasten rear headlining

Check the clips (2) on the headlining (1) for damage and replace if necessary.
Position the headlining (1) and guide it in under the sealing lip of the tailgate seal.
Fasten the headlining (1) using the clips (2).

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Perform the steps on the left and right side.
Tighten the screw (1) on the headlining (2).

TIGHTENING TORQUE SPECIFICATION

Headlining on frame
Oval-head screw	tightening torque	1.5 Nm

Courtesy of BMW OF NORTH AMERICA, INC.