Removing all intermediate levers

Intermediate lever

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: TECHNICAL INFORMATION
When replacing one or more intermediate levers:
When removing the intermediate lever, it is imperative to note the part number of the intermediate lever.
A mixed installation of intermediate levers is only permitted in combination with the appropriate torsion spring .
For further information on possible combinations, see the applicable BMW parts catalogue.

Remove the intermediate lever (1) and arrange it in the special tool 0 495 105 (11 4 480) in order.
Repeat the step for all intermediate levers (1) .

Courtesy of BMW OF NORTH AMERICA, INC.