Replacement of the windshield washer pump
WARNING:
Vehicle may slip off the vehicle hoist if the vehicle hoist is handled incorrectly.
Danger! immobilization period-threatening injuries!
Danger! immobilization period-threatening injuries!
- Observe safety instructions on raising the vehicle using a vehicle hoist.
- For additional information see: RAISING THE VEHICLE WITH A VEHICLE LIFT .
Preliminary work
- Refer to REMOVING THE WHEEL .
- Refer to REMOVING THE FRONT SECTION OF THE FRONT WHEEL ARCH COVER .
- Refer to REMOVING THE REAR SECTION OF THE FRONT WHEEL ARCH COVER FRONT .
- Refer to REMOVING WASHER FLUID RESERVOIR .
Remove windshield washer pump
- Pull windshield washer pump (1) out of washer fluid reservoir (2).
- Pull strainer with gasket (1) out of the washer fluid reservoir (2).
- Replace the window washer pump.
Parts: windshield washer pump
Installing the window washer pump
- Check strainer with seal (1) and pump (2) for damage.
- Join strainer with gasket (1) into the washer fluid reservoir (2).
- Join windshield washer pump (1) into washer fluid reservoir (2).
Follow-up work
- Refer to INSTALLING WASHER FLUID RESERVOIR .
- Refer to INSTALLING THE REAR SECTION OF THE FRONT WHEEL ARCH COVER .
- Refer to INSTALLING THE FRONT SECTION OF THE FRONT WHEEL ARCH COVER .
- Refer to MOUNTING THE WHEEL .