Remove lin power distribution box

Preliminary work 

• Refer to DEACTIVATING THE 48V ELECTRICAL SYSTEM .
• Refer to DISCONNECTING AND CONNECTING BATTERY GROUND LEAD .
• Refer to REMOVING THE FLAP IN THE LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL ON THE RIGHT .

• Unlock lock (1).
• Pull out the pdc-/pma control unit (2) downwards from the holder.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Unlock detents (1) and feed out the power distribution box (2) from holder (3).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Unlock plug connection (1) and disconnect.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Release the lock (1) in the arrow direction.
• Remove lin power distribution box (2).

Courtesy of BMW OF NORTH AMERICA, INC.