Removing the power distribution box of the positive battery cables at the rear
Preliminary work
- Refer to DEACTIVATING THE 48V ELECTRICAL SYSTEM .
- Refer to DISCONNECTING AND CONNECTING BATTERY GROUND LEADS
- Refer to REMOVING THE LOADING EDGE TRIM .
- Refer to REMOVING THE UPPER LUGGAGE COMPARTMENT TRIM PANELS .
- Refer to REMOVING RIGHT LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL .
- Open cover (1).
- Release nuts (2) and remove the positive battery cables.
- Unlock plug connection (3) and disconnect.
- Remove nuts (arrows) and the power distribution box (4).