Installing the left mounting bracket
- Install the left mounting bracket (3) .
- Tighten the screws (1) .
TIGHTENING TORQUE SPECIFICATION
| Engine support bracket on highly integrated electrified drive topology | |
|---|---|
| M12x1.5x75/100/110/135/215 | 100 Nm |
- Tighten down screw (2) .
TIGHTENING TORQUE SPECIFICATION
| Engine support bracket on highly integrated electrified drive topology | |
|---|---|
| M12x1.5x75/100/110/135/215 | 100 Nm |