Install B-pillar trim panel

Check the clips (1) for damage and replace if necessary.

Courtesy of BMW OF NORTH AMERICA, INC.
Guide upper seat belt (2) into B-pillar trim panel (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Insert the B-pillar trim panel (1) in the guides (2) and below the lip of edge protection at the front and rear.
Clip the B-pillar trim panel in (1) with the clips (3).

Courtesy of BMW OF NORTH AMERICA, INC.
Adjust the front seat completely to the front and top.
Insert the end fitting (2).
Replace the screw (1).
Parts: Screw
Tighten down screw (1).

Courtesy of BMW OF NORTH AMERICA, INC.