Grease the brake pads, the brake anchor plate and the brake caliper with the brake pad paste (17-inch low brake)
- Clean the contact surfaces (1) of the brake pistons (4 pieces) with brake cleaner.
- Check dust covers (2) for damage. Replace if necessary.
- Replace the sliding plates (1).
Parts: Sliding plates
- Mount the sliding plates (1).
- Make sure that the sliding plates (1) fit correctly in the guides.
- Clean supporting surfaces (1) for the brake pads on the brake caliper.
If possible, do not clean the supporting surfaces mechanically in order to avoid damaging the surface coating.
- Apply a thin coat of the brake pad paste to the contact surfaces (1).
CONSUMABLE SPECIFICATION
| Brake block paste * TU = Trade Unit. TU numbers cannot be ordered! For invoicing purposes only. |
3 g, Bag | 83192158851 |
| 100 g, Tube | 83192158852 | |
| 5 g, TU* | 83230140233 |