Remove the control unit for the trailer hitch
Preliminary work
- Refer to DEACTIVATING THE 48 V ELECTRICAL SYSTEM .
- Refer to DISCONNECTING ALL BATTERY GROUND LEADS .
- Refer to REMOVING REAR WINDOW STORAGE SHELF AT FRONT .
- Refer to REMOVING LUGGAGE COMPARTMENT FLOOR COVERING .
- Refer to REMOVING THE LOADING EDGE TRIM .
- Refer to REMOVING THE RIGHT LUGGAGE COMPARTMENT COVER .
- Refer to REMOVING LED IN LUGGAGE COMPARTMENT ON RIGHT .
- Refer to REMOVING RIGHT LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL .
NOTE:
Schematic diagram is for example purposes. Some parts may differ in certain details.
- Unlock plug connection (1) and disconnect.
- Release the control unit for the trailer hitch (2) from the detents (3) and remove.