Installing the end cap of the slide/tilt sunroof frame

• Position the end cap (2)  .
• Fasten blind rivet (1)  .

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE DRIVETRAIN FOR THE GLASS SLIDE/TILT ROOF PANEL .
• Refer to COMPLETELY INSTALLING THE SLIDING/TILTING SUNROOF .
• Refer to INSTALLING THE HEADLINING (WITH SLIDING/TILTING SUNROOF) (LOWERED) .
• Refer to INSTALLING THE TRIM OF THE 3RD BRAKE LIGHT .
• Refer to INSTALLING THE LEFT AND RIGHT B-PILLAR TRIM PANEL .
• Refer to INSTALLING LEFT AND RIGHT REAR SIDE TRIM PANEL .
• Refer to INSTALLING THE INNER DOOR SILL COVER STRIP ON THE LEFT AND RIGHT .
• Refer to INSTALLING THE LEFT AND RIGHT C-PILLAR TRIM PANEL .
• Refer to INSTALLING THE LEFT AND RIGHT BACKREST SIDE SECTION .
• Refer to INSTALLING THE REAR SEAT .
• Refer to INSTALLING ROOF FUNCTION CENTER (FZD) .
• Refer to INSTALLING THE LEFT AND RIGHT SUN VISORS AND COUNTER SUPPORT .
• Refer to INSTALLING A-PILLAR TRIM PANEL, LEFT AND RIGHT .
• Refer to INSTALLING GLASS SLIDE/TILT SUNROOF PANEL .
• Refer to ADJUSTING GLASS SLIDE/TILT SUNROOF PANEL .
• Refer to INSTALLING THE BELLOWS FOR THE GLASS SLIDE/TILT SUNROOF .
• Refer to INITIALIZING THE GLASS SLIDE/TILT SUNROOF .