Removing the drivetrain for the glass slide/tilt roof panel
Preliminary work
- Refer to REMOVING A-PILLAR TRIM PANEL, LEFT AND RIGHT .
- Refer to REMOVING THE SUN VISORS AND THE LEFT AND RIGHT COUNTER SUPPORTS .
- Refer to REMOVING THE ROOF FUNCTION CENTER (FZD) .
- Refer to REMOVING INTERIOR ROOF LIGHT .
- Refer to REMOVING THE LEFT AND RIGHT B-PILLAR TRIM PANELS PARTIALLY .
- Refer to REMOVING THE REAR LEFT AND RIGHT HANDLE .
- Refer to REMOVING RIGHT C-PILLAR TRIM PANEL LEFT AND RIGHT .
- Refer to REMOVING REAR WINDOW STORAGE SHELF AT FRONT .
- Refer to REMOVING THE COVER OF THE LEFT AND RIGHT LUGGAGE COMPARTMENT SIDE SHELF .
- Refer to REMOVING THE LEFT AND RIGHT D-PILLAR TRIM PANEL .
- Refer to LOWERING THE HEADLINING (WITH SLIDING/TILTING SUNROOF) .
Precondition
The glass slide/tilt roof panel is closed.
- Loosen screws (1) .
- Unlock the existing plug connection (2) and disconnect it.
- Guide out drivetrain (3) for the glass slide/tilt roof panel.